CLI Guide

Security Commands 1098
Command History
Syntax updated in version 6.6 firmware.
Example
The following shows example CLI display output for the global configuration.
console#show dot1x
Administrative Mode............... Enabled
EAPOL Flood Mode.................. Disabled
Software Version.................. 1
console#show dot1x supplicant summary gi1/0/1
Operating
Interface Port Status
--------- ------------ ------------ ------------
Gi1/0/1 Authorized
The following shows example CLI display output for the detail parameter.
console #show dot1x detail gi1/0/3
Port........................................... Gi1/0/3
Protocol Version............................... 1
Supplicant Timeout The timer used by the authenticator state machine on this port
to timeout the supplicant. The value is expressed in seconds
and will be in the range of 1 and 65535.
Server Timeout The timer used by the authenticator on this port to timeout the
authentication server. The value is expressed in seconds and will
be in the range of 1 and 65535.
Maximum Request-
Identities
The maximum number of times (attempts), the authenticator
state machine on this port will retransmit an EAPOL EAP
Request-Identity frames before timing out the supplicant.
Maximum Requests The maximum number of times the authenticator state
machine on this port will retransmit an EAPOL EAP
Request/Identity before restarting the authentication process.
Key Transmission
Enabled
Indicates if the key is transmitted to the supplicant for the
specified port. Possible values are True or False.
Field Description