CLI Guide

Security Commands 1101
......
......
console#show authentication authentication-history all
Time Stamp Interface MAC-Address VLANID Auth Status
--------------------- --------- ----------------- ------ ----------
Mar 22 2010 01:16:31 Gi1/0/2 00:01:02:03:04:05 111 Authorized
Mar 22 2010 01:20:33 Gi1/0/7 00:00:0D:00:00:00 222 Authorized
console#show authentication authentication-history gi1/0/1
Time Stamp Interface MAC-Address VLANID Auth Status
--------------------- --------- ----------------- ------ ----------
Mar 22 2010 01:16:31 Gi1/0/1 00:01:02:03:04:05 111 Authorized
Mar 22 2010 01:18:22 Gi1/0/1 00:00:00:03:04:05 0 Unauthorized
console#show authentication authentication-history gi1/0/1 failed-auth-only
Time Stamp Interface MAC-Address VLANID Auth Status
--------------------- --------- ----------------- ------ ----------
Mar 22 2010 01:18:22 Gi1/0/2 00:00:00:03:04:05 0 Unauthorized
show authentication clients
Use the show authentication clients command to display details regarding
authenticated clients.
Syntax
show authentication clients {all|interface interface–id }
• all—Display information for all interfaces on which an authenticated
client is present.
• interface–id—Display information for a single Ethernet (physical)
interface identifier. See Interface Naming Conventions for interface
representation.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes