CLI Guide

Security Commands 1103
Command History
Command syntax show dot1x clients deprecated in favor of show
authentication clients in version 6.6 firmware.
Example
The following examples show the output for both forms of the command.
Only a single client is authenticated on the switch.
console#show authentication clients all
Interface MAC-Address Method Host Mode Control Mode VLAN
Assigned Reason
--------- ----------------- ------- ------------ ------------ ---------
-----------------
0/16 10:8D:B6:C6:00:00 802.1X multi-host auto RADIUS
Assigned VLAN (10)
console#show authentication clients interface gi1/0/2
Mac Address.................................... 58:05:94:1C:00:00
User Name...................................... testixia
VLAN Assigned Reason........................... Voice VLAN (100)
Session Timeout This value indicates the time for which the given session is
valid. The time period in seconds is returned by the
RADIUS server on authentication of the port.
Session Termination
Action
This value indicates the action to be taken once the
session timeout expires. Possible values are Default and
Radius-Request. If the value is Default, the session is
terminated and client details are cleared. If the value is
Radius-Request, then a reauthentication of the client is
performed.
Filter ID Identifies the Filter ID returned by the RADIUS server
when the client was authenticated. This is a configured
DiffServ policy name on the switch.
DACL Identifies the Downloadable ACL returned by the
RADIUS server when the client was authenticated.
Acct Session ID The Accounting Session ID associated with the client
session.
Field Description