CLI Guide

Security Commands 1105
• Maximum Request-Identities —The maximum number of EAP
RequestId retransmissions to a Supplicant 1 – 20 sec 2
• Quiet Period —The time the authenticator waits after timing out a
supplicant before restarting authentication 60 sec
• Max Users —The maximum number of authenticated supplicants on the
port 1-64 64
Example
console#show dot1x interface gigabitethernet 1/0/10
Administrative Mode............... Disabled
Dynamic VLAN Creation Mode........ Disabled
Monitor Mode...................... Disabled
Port Admin Oper Reauth Reauth
Mode Mode Control Period
------- ------------------ ------------ -------- ----------
Gi1/0/10 auto N/A FALSE 3600
Quiet Period................................... 60
Transmit Period................................ 30
Maximum Request-Identities..................... 2
Maximum Requests............................... 2
Max Users...................................... 64
VLAN Assigned..................................
Supplicant Timeout............................. 30
Guest-vlan Timeout............................. 90
Server Timeout (secs).......................... 30
MAB mode (configured).......................... Disabled
MAB mode (operational)......................... Disabled
MAB Protocol................................... EAP
Authentication Server Dead action for Voice.... None
Authentication Server Alive action............. None
Authenticator PAE State........................ Initialize
Backend Authentication State................... Idle
show dot1x interface statistics
Use the show dot1x interface statistics command to display 802.1x statistics
for the specified interface.