CLI Guide

Dell EMC Networking CLI 124
Link Dependency
LLDP
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
action Indicates if the link-dependency group should
mirror or invert the status of the depended on
interfaces.
LD
link-dependency group Enters the link-dependency mode to configure
a link-dependency group.
GC
add Adds member gigabit Ethernet port(s) to the
dependency list.
LD
depends-on Adds the dependent Ethernet ports or port
channels list.
LD
show link-dependency Shows the link dependencies configured on a
particular group.
PE
Command Description Mode
a
clear lldp remote-data Deletes all data from the remote data table. PE
clear lldp statistics Resets all LLDP statistics. PE
debug lldp Displays LLDP debug information. PE
lldp med Enables/disables LLDP-MED on an interface. IC
lldp med confignotification Enables sending the topology change
notification.
IC
lldp med
faststartrepeatcount
Sets the value of the fast start repeat count. GC
lldp med-tlv-select Specifies which optional TLVs in the LLDP
MED set are transmitted in the LLDPDUs.
IC
lldp notification Enables remote data change notifications. IC
lldp notification-interval Limits how frequently remote data change
notifications are sent.
GC