CLI Guide

Layer 3 Routing Commands 1276
User Guidelines
Origination of the default route is not subject to a prefix filter configured
with the distribute-list out command.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console(config-router-af)#default-information originate
default metric (BGP Router Configuration)
This command sets the value of the Multi Exit Discriminator (MED)
attribute on routes redistributed into BGP when no metric has been specified
in the redistribute command.
Syntax
default-metric value
no default-metric
• value—The value to as the MED. The range is 1 to 4,294,967,295.
Default Configuration
By default, no default metric is set and no MED is included in redistributed
routes.
Command Mode
BGP Router Configuration mode
User Guidelines
There are no user guidelines.
Command History
Introduced in version 6.2.0.1 firmware.