CLI Guide

Layer 3 Routing Commands 1290
• no-advertise—The well-known standard community: NO_ADVERTISE
(0xFFFFFF02), which indicates the community is not to be advertised.
• no-export—The well-known standard community: NO_EXPORT,
(0xFFFFFF01), which indicates the routes are not to be advertised outside
the community.
• no-export-subconfed—The well-known standard community:
NO_EXPORT_SUBCONFED (0xFFFFFF03), which indicates the routes
are not to be advertised to external BGP peers.
Default Configuration
No community lists are configured by default.
Command Mode
Global Configuration mode
User Guidelines
A community list statement with no community values is considered a match
for all routes, regardless of their community membership. So the statement
ip community-list bullseye permit
is a “permit all” statement.
A community number may be entered in either format, as a 32-bit integer or a
pair of 16-bit integers separated by a colon, regardless of whether the ip bgp-
community new-format command is active. Up to 16 communities, including
the well-known communities, can be listed in a single command. Up to 32
statements may be configured with a given community list name. Up to 128
unique community list names may be configured.
Successive invocations of the command are additive in that they add to the
configured communities up to the maximum.
If more than the maximum allowed communities are configured, the excess
entries are ignored.
Command History
Introduced in version 6.2.0.1 firmware.