CLI Guide

Dell EMC Networking CLI 130
class-map rename Changes the name of a DiffServ class. GC
classofservice dot1p-
mapping
Maps an 802.1p priority to an internal traffic
class for a switch.
GC or
IC
classofservice ip-dscp-
mapping
Maps an IP DSCP value to an internal traffic
class.
GC
classofservice trust Sets the class of service trust mode of an
interface.
GC or
IC
conform-color Specifies the precoloring of packets conforming
to or exceeding the specified rate(s). The
possible actions are drop, setdscp-transmit, set-
prec-transmit, or transmit.
PCMC
cos-queue min-bandwidth Specifies the minimum transmission
bandwidth for each interface queue.
GC or
IC
cos-queue random-detect Configures WRED packet drop policy on an
interface CoS queue.
GC or
IC
cos-queue strict Activates the strict priority scheduler mode for
each specified queue.
GC or
IC
diffserv Sets the DiffServ operational mode to active. GC
drop Use the drop policy-class-map configuration
command to specify that all packets for the
associated traffic stream are to be dropped at
ingress.
PCMC
mark cos Marks all packets for the associated traffic
stream with the specified class of service value
in the priority field of the 802.1p header.
PCMC
mark ip-dscp Marks all packets for the associated traffic
stream with the specified IP DSCP value.
PCMC
mark ip-precedence Marks all packets for the associated traffic
stream with the specified IP precedence value.
PCMC
match access-group Adds ACL match criteria to a class map. CMC
match class-map Adds add to the specified class definition the
set of match conditions defined for another
class.
CMC
Command Description Mode
a