CLI Guide

Dell EMC Networking CLI 134
Spanning Tree
traffic-shape Specifies the maximum transmission
bandwidth limit for the interface as a whole.
GC or
IC
vlan priority Assigns a default VLAN priority tag for
untagged frames ingressing an interface.
IC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
clear spanning-tree
detected-protocols
Restarts the protocol migration process on all
interfaces or on the specified interface.
PE
exit (mst) Exits the MST configuration mode and applies
configuration changes.
MC
instance (mst) Maps VLANs to an MST instance. MC
name (MST) Defines the MST configuration name. MC
revision (mst) Defines the configuration revision number. MC
show spanning-tree Displays spanning tree configuration. PE
show spanning-tree
summary
Displays spanning tree settings and parameters
for the switch.
PE
show spanning-tree vlan Displays spanning tree information per VLAN
and also lists the port roles and states as well as
the port cost.
PE
spanning-tree Enables spanning-tree functionality. GC
spanning-tree auto-portfast Sets the port to auto portfast mode. IC
spanning-tree backbonefast Enables the detection of indirect link failures
and accelerate spanning tree convergence on
STP-PV/RSTP-PV configured switches using
Indirect Link Rapid Convergence (IRC).
GC
spanning-tree bpdu flooding Allows flooding of BPDUs received on
nonspanning-tree ports to all other non-
spanning-tree ports.
GC
spanning-tree bpdu-
protection
Enables BPDU protection on a switch. GC
Command Description Mode
a