CLI Guide

Dell EMC Networking CLI 149
ignore Sets the switch to ignore certain authentication
parameters from dynamic RADIUS clients.
DRC
port Sets the port on which to listen for CoA and
disconnect requests from authorized dynamic
RADIUS clients.
DRC
server-key Configures a global shared secret that is used for
all dynamic RADIUS clients that do not have an
individual shared secret configured.
DRC
show dot1x Displays 802.1X status for the switch or the
specified interface.
PE
show authentication
authentication-history
Displays the dot1x authentication events and
information during successful and unsuccessful
dot1x authentication processes.
PE
show authentication clients Displays detailed information about the users
who have successfully authenticated on the
system or on a specified port.
PE
show dot1x interface Shows the status of MAC Authentication
Bypass.
PE
show dot1x interface
statistics
Displays 802.1X statistics for the specified
interface.
PE
show dot1x users Displays active 802.1X authenticated users for
the switch.
PE
clear authentication
authentication–history
Clears the authentication history table captured
during successful and unsuccessful
authentication.
PE
authentication event no-
response
Sets the guest VLAN on a port. IC
dot1x timeout guest-vlan-
period
Sets the number of seconds that the switch
waits before authorizing the client if the client
is a dot1x unaware client.
IC
authentication event fail Specifies the unauthenticated VLAN on a port. IC
show dot1x advanced Displays 802.1X advanced features for the
switch or specified interface.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a