CLI Guide

Layer 3 Routing Commands 1537
Prefix List Out The global prefix list used to filter outbound routes to all
neighbors.
Neighbors A list of configured neighbors and the inbound and outbound
policies configured for each.
OSPFv2 Section
Routing Protocol OSPFv2.
Router ID The router ID configured for OSPFv2.
OSPF Admin Mode Whether OSPF is enabled or disabled globally.
Maximum Paths The maximum number of next hops in an OSPF route.
Routing for
Networks
The address ranges configured with an OSPF network
command.
Distance The administrative distance (or “route preference”) for intra-
area, inter-area, and external routes.
Default Route
Advertise
Whether OSPF is configured to originate a default route.
Always Whether default advertisement depends on having a default
route in the common routing table.
Metric The metric configured to be advertised with the default route.
Metric Type The metric type to advertise for redistributed routes of this
type.
Redist Source The type of routes OSPF is redistributing.
Metric The metric to advertise for redistributed routes of this type.
Metric Type The metric type to advertise for redistributed routes of this
type.
Subnets Whether OSPF redistributes subnets of classful addresses, or
only classful prefixes.
Dist List A distribute list used to filter routes of this type. Only routes
that pass the distribute list are redistributed.
Number of Active
Areas
The number of OSPF areas with at least one interface running
on this router. Also broken down by area type.
Parameter Description