CLI Guide

Layer 3 Routing Commands 1562
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld host-proxy reset-status
ipv6 mld host-proxy unsolicit-rprt-interval
Use the ipv6 mld host-proxy unsolicit-rprt-interval command to set the
unsolicited report interval for the MLD Proxy router. This command is only
valid when MLD Proxy is enabled on the interface. Use the “no” form of this
command to reset the MLD Proxy router's unsolicited report interval to the
default value.
Syntax
ipv6 mld host-proxy unsolicited-report-interval interval
no ipv6 mld host-proxy unsolicited-report-interval
• interval — The interval between unsolicited reports (Range: 1–260
seconds).
Default Configuration
The unsolicited report interval is 1 second by default.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines
Example
console(config-if-vlan3)#ipv6 mld host-proxy unsolicit-rprt-interval 10