CLI Guide

Layer 3 Routing Commands 1587
Expiry Time (hh:mm:ss)........................ ------
Group Address................................ FF1E::2
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
Group Address................................ FF1E::3
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
Group Address................................ FF1E::4
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
show ipv6 mld interface
The show ipv6 mld interface command is used to display MLD related
information for an interface.
Syntax
show ipv6 mld interface { vlan vlan-id | all}
• vlan-id — A valid VLAN id.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following information is displayed for the specified interface:
Field Description
Interface The interface number in unit/slot/port format.
MLD Global
Admin Mode
This field displays the configured global administrative status of
MLD.