CLI Guide

Layer 3 Routing Commands 1600
• ipv6-prefix/ prefix-length—Specifies an IPv6 network for which the
matching route would be displayed.
• best—Specifies that only the best routes are displayed. If the connected
keyword is selected for protocol, the best option is not available because
there are no best or non-best connected routes.
• all—Display all routes.
• track-table—Display the tracked IPv6 static routes for the selected VRF or
the global routing instance.
• preferences—Display the routing preferences.
• static—Show static routes only.
• summary—Show a summary of the route types.
• vlan vlan-id—A VLAN identifier.
• loopback loopback-id—A loopback identifier.
• tunnel tunnel-id—A tunnel identifier.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
The output of the command also displays the IPv6 address of the default
gateway and the default route associated with the gateway.
Use the track-table argument to display the IPv6 routes being tracked.
Command History
Command updated in version 6.6 firmware.
Example
The following example displays the IPv6 address of the default gateway and
the default route associated with the gateway.