CLI Guide

Dell EMC Networking CLI 163
neighbor password Enables MD5 authentication of TCP segments
sent to and received from a neighbor, and to
configure an authentication key.
BR
neighbor prefix-list (BGP
Router Configuration)
Filters advertisements sent to a specific
neighbor based on the destination prefix of each
route.
BR
neighbor prefix-list (IPv6
Address Family
Configuration)
Specifies an IPv6 prefix list to filter routes
received from or advertised to a given peer.
IPAF
neighbor remote-as Configures a neighbor and identify the
neighbor’s autonomous system.
BR
neighbor remove-private-as Removes private AS numbers when advertising
IPv4 routes to an external peer.
BR
neighbor rfc5549-support Enables advertisement of IPv4 routes over IPv6
next hops selectively to an external BGP IPv6
peer.
BR
neighbor route-map (BGP
Router Configuration)
Applies a route map to incoming or outgoing
routes for a specific neighbor.
BR
neighbor route-map (IPv6
Address Family
Configuration)
Specifies a route map to be applied to inbound
or outbound IPv6 routes.
IPAF
neighbor route-reflector-
client (BGP Router
Configuration)
Configures an internal peer as an IPv4 route
reflector client.
BR
neighbor route-reflector-
client (IPv6 Address Family
Configuration)
Configures an internal peer as an IPv4 route
reflector client.
IPAF
neighbor send-community
(BGP Router
Configuration)
Configures the local router to send the BGP
communities attribute in UPDATE messages to
a specific neighbor.
BR
neighbor send-community
(IPv6 Address Family
Configuration)
Tells BGP to send the COMMUNITIES
attribute with routes advertised to the peer.
IPAF
neighbor shutdown Administratively disables communications with
a specific BGP neighbor.
BR,
IPAF
Command Description Mode
a