CLI Guide

Layer 3 Routing Commands 1638
--------------- --------- ----------- -----------
192.168.10.2 VLAN0001 00:02:55 00:01:15
192.168.20.2 VLAN0010 00:03:50 00:02:10
If no neighbors are learned on any of the interfaces, the following message is
displayed.
No neighbors are learned on any interface.
show ip pim rp-hash
The show ip pim rp-hash command displays the rendezvous point (RP)
selected for the specified group address.
Syntax
show ip pim rp-hash group-address
• group-address — A valid multicast address supported by RP.
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
The following fields are displayed:
Example
console#show ip pim rp-hash 239.1.2.0
RP-Address 192.168.10.1 Type Static
If no RP Group mapping exists on the router, the following message is
displayed:
No RP-Group mappings exist/learned for the specified group address.
Field Description
RP Address Address of the RP
Type Origin from where this group mapping was learned.