CLI Guide

Layer 3 Routing Commands 1658
* FF43::5 00:00 00:01:00 :: RPT
2001::5 FF43::5 02:54 00:00:35 2001::5 SPT
console#show ipv6 mroute group FF43::5 summary
Multicast Route Table Summary
Source IP Group IP Protocol IIF OIF Expiry
--------------- --------------- -------- --------- --------- ------
* FF43::5 PIMSM Vl11
Vl13
2001::5 FF43::5 PIMSM Vl12 Vl11
Vl13
show ipv6 mroute source
Use the show ipv6 mroute source command to display the multicast
configuration settings such as flags, timer settings, incoming and outgoing
interfaces, RPF neighboring routers, and expiration times of all the entries in
the multicast mroute table containing the sourceipaddr or sourceipaddr |
groupipaddr pair value(s).
Syntax
show ipv6 mroute source sourceipaddr {summary | groupipaddr}
• sourceipaddr — IP address of source.
• groupipaddr — IP address of multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 mroute source 2001::5 ?