CLI Guide

Dell EMC Networking CLI 166
show ip bgp neighbors Shows details about BGP neighbor
configuration and status.
UE
show ip bgp neighbors
advertised-routes
Displays the list of routes advertised to a
specific neighbor.
PE
show ip bgp neighbors
received-routes
Displays the list of routes received from a
specific neighbor.
PE
show ip bgp neighbors policy Displays the inbound and outbound IPv4
policies configured for a specific peer.
PE
show ip bgp route-reflection Displays all global configuration related to IPv4
route reflection, including the cluster ID and
whether client-to-client route reflection is
enabled, and lists all the neighbors that are
configured as route reflector clients.
PE
show ip bgp statistics Displays recent decision process history. UE
show ip bgp summary Displays a summary of BGP configuration and
status.
UE
show ip bgp template Lists the routes that are allowed by the specified
community list.
PE
show ip bgp traffic Lists the routes that are allowed by the specified
community list.
UE
show ip bgp update-group Reports the status of IPv4 outbound update
groups and their members.
PE
show ip bgp vpn4 Displays the VPNv4 address information from
the BGP table.
PE,
GC
template peer Creates a BGP peer template and enters peer
template configuration mode.
BR
timers bgp Configures the default keepalive and hold
timers that BGP uses for all neighbors unless
specifically overridden by the neighbor timers
command.
BR
timers policy-apply delay Configures the delay after which any change to
the global or per BGP neighbor
inbound/outbound policies are applied.
BR
Command Description Mode
a