CLI Guide

Layer 3 Routing Commands 1665
IP Service Level Agreement
Commands
Dell EMC Networking N2000E/N2100E-ON/N2200-ON/N3000-ON
Series Switches
The IP service-level agreement (SLA) feature allows users to monitor network
performance between routers or from a router to a remote IP device.
N2000/N2100-ON/N2200-ON/N3000E-ON Series supports the following
measurement capabilities:
• Remote IP reachability tracking.
• Round-trip-time threshold monitoring
These metrics are collected by measuring ICMP response time and
connectivity. This feature is deployed mostly in Enterprise networks on multi-
homed customer edge devices, where there is a need to automatically switch
to the next priority ISP in case of reachability issues with the current ISP.
ip sla
Use the ip sla command to create and confirm an IP Service Level Agreement
(SLAs) operation and enter IP SLA configuration mode. Use the no form of
the command to remove all the configuration information of an IP SLA
operation, which includes removing the schedule of the operation.
Syntax
ip sla operation-number
no ip sla operation-number
• operation-number—The number used to identify an IP SLA operation.
The range is 1 to 128.
Default Configuration
By default, there are no operations configured.
Command Mode
Global Configuration mode