CLI Guide

Layer 3 Routing Commands 1679
• operation-number —(Optional) IP SLA number of a specific operation
associated with the statistics to display.
Default Configuration
By default, IP SLA operation configurations are shown.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
submodes
User Guidelines
This command has no user guidelines.
Command History
Command introduced in version 6.6 firmware.
Example
IP SLAs Internet Control Message Protocol (ICMP) echo operations support
both IPv4 and IPv6 addresses. The sample outputs from the show ip sla
configuration command for different IP SLAs operations in IPv4 and IPv6
networks are shown below.
console#show ip sla configuration 3
Entry number: 3
Type of operation: echo
Target address/Source address: 1.1.1.1/0.0.0.0
Operation timeout (milliseconds): 5000
Vrf Name:
Schedule:
Next Scheduled Start Time: Start Time already passed
Operation frequency (seconds): 60
Life: Forever
Threshold (milliseconds): 5000
In the following example the output from the show ip sla configuration
command when the specified operation is an ICMP echo operation in an IPv6
network is shown.
console#show ip sla configuration 5