CLI Guide

Dell EMC Networking CLI 168
DHCP Server and Relay Agent (IPv4)
show ipv6 prefix-list Displays the contents of IPv6 prefix lists. PE or
GC
clear ip prefix-list Resets the IPv4 prefix-list counters. PE
clear ipv6 prefix-list Resets the IPv6 prefix-list counters. PE
clear ip community-list Resets the IPv6 prefix-list counters. PE
set as-path Prepends one or more AS numbers to the AS
path in a BGP route.
RC
set comm-list delete Removes BGP communities from an inbound
or outbound UPDATE message.
RM
set community Modifies the communities attribute of
matching routes.
RM
set ipv6 next-hop (BGP) Sets the IPv6 next hop of a route. RM
set local-preference Sets the local preference of specific BGP routes. RM
set metric Sets the metric of a route. RM
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
ip dhcp pool Defines a DHCP address pool that can be used
to supply addressing information to DHCP
client. This command puts the user into DHCP
Pool Configuration mode.
GC
bootfile Sets the name of the image for the DHCP
client to load.
DP
clear ip dhcp binding Removes automatic DHCP server bindings. PE
clear ip dhcp conflict Removes DHCP server address conflicts. PE
client-identifier Identifies a a Microsoft
®
DHCP client to be
manually assigned an address.
DP
client-name Specifies the host name of a DHCP client. DP
default-router Sets the IPv4 address of one or more routers for
the DHCP client to use.
DP
Command Description Mode
a