CLI Guide

Dell EMC Networking CLI 173
GMRP
IGMP
show ip dvmrp prune Displays the table that lists the router’s
upstream prune information.
PE
show ip dvmrp route Displays the multicast routing information for
DVMRP.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
gmrp enable Enables GMRP globally or on a port. GC or
IC
clear gvrp statistics Clears all the GMRO statistics information. PE
show gmrp configuration Displays GMRP configuration. GC or
IC
Command Description Mode
a
ip igmp last-member-query-
count
Sets the number of Group-Specific Queries
sent before the router assumes that there are
no local members on the interface.
IC
ip igmp last-member-query-
interval
Configures the Maximum Response Time
inserted in Group-Specific Queries which are
sent in response to Leave Group messages.
IC
ip igmp mroute-proxy Configures downstream IGMP proxy on the
selected VLAN interface associated with
multicast hosts.
IC
ip igmp query-interval Configures the query interval for the specified
interface. The query interval determines how
fast IGMP Host-Query packets are transmitted
on this interface.
IC
ip igmp query-max-response-
time
Configures the maximum response time
interval for the specified interface.
IC
Command Description Mode
a