CLI Guide

Dell EMC Networking CLI 175
IP Helper/DHCP Relay
show ip igmp-proxy groups Displays a table of information about multicast
groups that IGMP Proxy reported.
PE
show ip igmp proxy-service
groups detail
Displays complete information about multicast
groups that IGMP Proxy has reported.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
ip dhcp relay maxhopcount Configures the maximum allowable relay agent
hops for BootP/DHCP Relay on the system.
GC
ip dhcp relay minwaittime Configures the minimum wait time in seconds
for BootP/DHCP Relay on the system.
GC
clear ip helper statistics Resets (to 0) the statistics displayed in show ip
helper statistics.
PE
ip dhcp relay information
check
Enables DHCP Relay to check that the relay
agent information option in forwarded
BOOTREPLY messages is valid.
GC
ip dhcp relay information
check-reply
Enables DHCP Relay to check that the relay
agent information option in forwarded
BOOTREPLY messages is valid.
IC
ip dhcp relay information
option
Enables the circuit ID option and remote agent
ID mode for BootP/DHCP Relay on the system
(also called option 82).
GC
ip dhcp relay information
option-insert
Enables the circuit ID option and remote agent
ID mode for BootP/DHCP Relay on the circuit
ID option and remote agent ID mode for
BootP/DHCP Relay on the interface (also called
option 82).
GC
ip helper-address (global
configuration)
Configures the relay of certain UDP broadcast
packets received on any interface.
GC
ip helper-address (interface
configuration)
Configures the relay of certain UDP broadcast
packets received on a specific interface.
IC
ip helper enable Enables relay of UDP packets. GC
Command Description Mode
a