CLI Guide

Layer 3 Routing Commands 1880
• vrf-name—The name of the VRF for which information is displayed. If no
vrf is specified, all VRFs are shown. The VRF name must match the
configured VRF name exactly, including capitalization.
• detail—Displays detailed information regarding the VRF.
Default Configuration
This command has no default configuration.
Command Mode
Exec mode, Privileged Exec mode, and all show modes
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
If no VRF name is given, the global routing instances and all other VRF
instances are shown.
This command is only available on the N3000-ON/N3100 switches.
Example
console(config)#show ip vrf
Number of VRs.........3
Name Identifier Route Distinguisher
--------- -------------- -------------------
Red 2 2:200
Blue 4 4:400
Green 3 3:300
console(config)#show ip vrf Red detail
VRF Identifier.................... 1
Description....................... Test network
Route Distinguisher............... 2:200
Maximum Routes.................... 512
Warning-only...................... TRUE
Route table size.................. 2
Number of interfaces.............. 2
Interfaces
-----------
Vl10
Lo1