CLI Guide

Switch Management Commands 1927
Example
console#
console#configure
console(config)#boot host retry-count 5
console(config)#no boot host retry-count
show auto-copy-sw
Use the show auto-copy-sw command to display Stack Firmware
Synchronization configuration status.
Syntax
show auto-copy-sw
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The show switch command also displays the switch firmware synchronization
status.
Example
console#show auto-copy-sw
Stack Firmware Synchronization
Synchronization: Enabled
SNMP Trap status: Enabled
Allow Downgrade: Enabled
show boot
Use the show boot command to display the auto install configuration and the
status.