CLI Guide

Switch Management Commands 2028
Command Mode
Global Configuration mode
User Guidelines
IPv6 DHCP relay and IPv6 DHCPv6 pool assignments require the DHCPv6
service to be enabled.
Example
The following example enables DHCPv6 globally.
console#configure
console(config)#service dhcpv6
console(config)#no service dhcpv6
show ipv6 dhcp
Use the show ipv6 dhcp command to display the DHCPv6 server name and
status.
Syntax
show ipv6 dhcp
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
The DUID value of the server will only appear in the output when a DHCPv6
lease is active.
Example
The following example displays the DHCPv6 server name and status.
console#show ipv6 dhcp
DHCPv6 is disabled