CLI Guide

Switch Management Commands 2045
Syntax
show hiveagent source-interface
Default Configuration
This command has no defaults.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The source VLAN must have an IP address assigned for it to be used by
HiveAgent.
Command History
Command introduced in version 6.5 firmware.
Example
console(config)# hiveagent
console(conf-hiveagent)#source interface vlan-id 1
show hiveagent status
Use the show hiveagent status command to display information on the
HiveAgent configuration. The status can be obtained from the HiveManager
NG web page.
Syntax
show hiveagent status
Default Configuration
This command has no defaults.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes