CLI Guide

Switch Management Commands 2103
For a system delivering peak power to a certain number of devices, if a new
device is attached to a high-priority port, power to a low-priority port is shut
down and the new device is powered up.
Syntax
power inline priority {critical | high | low}
no power inline priority
Command Mode
Interface Configuration (Ethernet).
User Guidelines
Priority is always enabled for all ports. If all ports have equal priority in an
overload condition, the switch will shut down the highest numbered ports
first.
Default Value
Low
Examples
console(config)#interface gigabitethernet 1/0/1
console(config-if-Gi1/0/1)# power inline priority high
power inline reset
Use the power inline reset command to reset the port.
Syntax
power inline reset
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration