CLI Guide

Switch Management Commands 2106
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Ports configured in static mode will always show as Class 0 regardless of the
actual PD type.
The power status column shows Off for ports that are administratively or
error disabled.
The Power column shows the actual power drawn, not the configured value.
If a port supplying power detects PSE equipment, the power to the port is
shut off. If a powered port shows input power detected status (0x24), and no
device is attached, the port should not be used as a possible short may exist.
The PoE controller returns the Total Power Consumed value in Watts. For
this reason, Total Power Consumption value displayed might not exactly
match the sum of power in milliwatts consumed by various Powered Devices.
The displayed information includes the following:
Examples
In the next example, the port is specified and the command displays the
configuration and status for the specified port.
console#show power inline gigabitethernet 1/0/13
Port Powered Device State Priority Status Class[W] Power[mW]
----- --------------- ----- -------- --------- ------------- ------
Gi1/0/13 Auto Low On 3.84 - 6.49 5000
Field Description
Priority Displays the configured priority, which is one of Critical, High,
Medium, or Low.
Admin Displays the requested power delivery state, which is either Auto or
Never.
Status Displays the operational state which is one of Off, Searching, On,
Faulty, Testing, TestFail, Requesting, or Overload.
Class Displays the class power range for a single interface or the class,
which is one of Class0, Class1, Class2, Class3, Class4, or Unknown.