CLI Guide

Switch Management Commands 2137
Example
console#debug console
debug crashlog
Use this command to display the crash log contents on the console.
Syntax
debug crashlog {crashlog-index | proc | kernel crashlog-index | data
crashlog-index [comp-id] [item-number] [add-param] [add-param] |
deleteall} [unit unit-index]
• crashlog-index—Indicates which crash log to display. The range is 0-4. 0
indicates the most recent log and 4 specifies the oldest log.
• proc—Display the process crash log.
• kernel—Display the kernel crash data.
• data—Display the crash summary data.
• deleteall—Delete all existing crash logs.
• unit-index—An optional specifier identifying the stack unit number
from which to obtain the crash log.
• comp-id—
• item-number—
• add-param—
Default Configuration
By default, this command displays all crash logs for the specified index.
Command Modes
Privileged Exec mode, User Config mode, all show modes
User Guidelines
There are no user guidelines for this command.
Command History
Introduced in version 6.2.0.1 firmware.