CLI Guide

Dell EMC Networking CLI 214
Support Assist
snmp-server enable traps Enables SNMP traps globally or enables specific
SNMP traps.
GC
snmp-server engineID local Specifies the Simple Network Management
Protocol (SNMP) engine ID on the local switch.
GC
snmp-server filter Creates or updates an SNMP server filter entry. GC
snmp-server group Configures a new SNMP group or a table that
maps SNMP users to SNMP views.
GC
snmp-server host Specifies the recipient of SNMP notifications. GC
snmp-server location Sets the system location string. GC
snmp-server user C onfigures a new SNMP Version 3 user. GC
snmp-server view Creates or updates a Simple Network
Management Protocol (SNMP) server view
entry.
GC
snmp-server v3-host Specifies the recipient of Simple Network
Management Protocol Version 3 (SNMPv3)
notifications.
GC
snmp-server source-interface Selects the interface from which to use the IP
address in the source IP address field of
transmitted SNMP traps and informs.
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
eula-consent Accepts or rejects the end-user license
agreement (EULA) for the SupportAssist server.
GC
contact-company Configures the contact information to be sent
to the SupportAssist server.
SAC
contact-person Configures the contact information to be sent
to the SupportAssist server.
SAC
enable Enables a SupportAssist server. SAC
Command Description Mode
a