CLI Guide

Switch Management Commands 2157
snooping packets. When neither keyword is used in the command, then all
MLD snooping packet traces are dumped. Vital information such as source
address, destination address, control packet type, packet length, and the
interface on which the packet is received or transmitted is displayed on the
console. Use the “no” form of this command to disable tracing of MLD
Snooping packets.
Syntax
debug mldsnooping packet [receive | transmit]
no debug mldsnooping packet [receive | transmit]
Default Configuration
Display of MLD Snooping traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug mldsnooping
debug ospf
Use the debug ospf command to enable tracing of OSPF packets received and
transmitted by the switch. Use the no form of this command to disable
tracing of OSPF packets.
Use of the optional VRF parameter executes the command within the
context of the VRF specific routing table.
Syntax
debug ospf packet [vrf vrf-name]
no debug ospf packet