CLI Guide

Switch Management Commands 2172
console(config)#exception protocol usb
console(config)#do dir usb
Attr Size(bytes) Creation Time Name
drwx 16384 Jan 01 1970 00:00:00 .
drwx 0 Dec 16 2014 18:25:43 ..
-rwx 943 Jan 01 1980 00:00:00 start.scr
-rwx 21642899 Jan 01 1980 00:00:00 backup.stk
-rwx 373 Jan 01 1980 00:00:00 start.text
-rwx 8685003 Apr 05 2011 16:27:28 3750CR.pdf
-rwx 37549 Aug 21 2013 07:55:22 maxacl.scr
-rwx 33903 Aug 22 2013 10:49:38 max-acls-per-list.scr
-rwx 139874 Oct 09 2013 14:00:18 max-ipv4-acls.scr
-rwx 5899 Sep 20 2013 14:23:26 local_repro.txt
-rwx 21262857 Oct 24 2013 12:12:30 N3000-ONvD.10.23.2.stk
Total Size: 1002160128
Bytes Used: 51904512
Bytes Free: 950255616
exception switch-chip-register
Use the exception switch-chip-register command to enable dumping the
switch chip registers in case of an exception. The register dump is taken only
for the master unit and not for the stack member units. Use the no form of
the command to disable dumping of the switch-chip registers.
Syntax
exception switch-chip-register
no exception switch-chip-register
Default Configuration
By default, switch register dumps are disabled.
Command Modes
Global Configuration mode
User Guidelines
This option should only be used under the direction of Dell support
personnel.
Switch registers are captured to the local file system.