CLI Guide

Switch Management Commands 2176
Example
The following example shows the default core transfer values.
console(config)#show exception
Coredump file name............................. crash
Coredump filename uses hostname................ False
Coredump filename uses time-stamp.............. False
TFTP server IP.................................
FTP server IP..................................
FTP user name..................................
FTP password...................................
File path...................................... dumps
Protocol....................................... none
Switch-chip-register........................... False
Compression mode............................... TRUE
Stack IP Address Protocol...................... dhcp
Stack IP Address:
IP Address Net Mask Gateway Assigned Unit
--------------- --------------- --------------- ---------------
show supported mibs
Use the show supported mibs command to display the implemented SNMP
MIBs.
Syntax
show supported mibs
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
Stack IP Address Protocol Obtain switch IP address (DHCP or
Static)
Parameter Description