CLI Guide

Dell EMC Networking CLI 218
reload Reloads the operating system. PE
set description Associates a text description with a switch in
the stack.
SG
slot Configures a slot in the system. GC
show banner Displays banner information. PE
show buffers Displays the system allocated buffers. UE or PE
show checkpoint
statistics
Displays the statistics for the checkpointing
process.
PE
show cut-through mode Show the cut-through mode on the switch. PE
show hardware profile
portmode
Displays the hardware profile information for
the 40G ports.
PE
show idprom interface Displays the optics EEPRM contents in a user-
readable format.
UE or PE
show interfaces Displays the traffic statistics for one or multiple
interfaces.
UE
show interfaces
advanced firmware
Displays the firmware revision of the PHY for a
port.
PE
show interfaces Displays the static and dynamic parameters for
the optics.
UE or PE
show memory cpu Displays the interface utilization. PE
show memory cpu Checks the total and available RAM space on
the switch.
PE
show msg-queue Displays the internal message queue
allocations.
PE, GC
show nsf Shows non-stop forwarding status. PE
show power-usage-
history
Shows the history of unit power consumption
for the unit specified in the command and total
stack power consumption.
PE
show process app-list Displays the system applications. PE or GC
show process app-
resource-list
Lists the configured and in-use resources for
each application known to the Process Manager.
PE or GC
Command Description Mode
a