CLI Guide

Switch Management Commands 2260
logged, and thus control whether traps appear in the buffered log or are e-
mailed and, if they are e-mailed, whether traps are considered urgent or non-
urgent.
logging web-session
Use the logging web-session command in Global Configuration mode to
enable web session logging. To disable, use the no form of this command.
Syntax
logging web-session
no logging web-session
Default Configuration
Disabled.
Command Mode
Global Configuration mode
User Guidelines
To see web session logs use the show logging command.
Example
console(config)#logging web-session
<133> Jan 12 13:51:55 10.130.185.29-6 CLI_WEB[emWeb]: cmd_logger_api.c(140)
9788 %% NOTE WEB:10.130.65.150:admin:session[0] created
<133> Jan 12 13:51:55 10.130.185.29-6 CLI_WEB[emWeb]: cmd_logger_api.c(140)
9789 %% NOTE WEB:10.130.65.150:admin:User admin logged in
port
Use the port command in Logging Configuration mode to specify the port
number of a SYSLOG server to which SYSLOG messages are sent. To reset to
the default value, use the no form of the command.
Syntax
port port