CLI Guide

Switch Management Commands 2263
<189> Oct 18 07:09:06 0.0.0.0-1 General[fp_main_task]:
sdm_template_mgr.c(488) 3 %% NOTE Booting with default SDM template Data
Center - IPv4 and IPv6.
<190> Oct 18 07:09:05 0.0.0.0-1 General[procLOG]: procmgr.c(3685) 2 %% INFO
Application Terminated (user.start, ID = 7, PID = 1349
<185> Oct 18 07:09:05 0.0.0.0-0 General[fp_main_task]: unitmgr.c(6612) 1 %%
ALRT Reboot 1 (0x1)
A protocol version 1 message will appear as follows:
<189>1 2017-10-18T07:09:22.796Z dhcp-10-130-182-178 TRAPMGR trapTask
[SDID@674 unit=”1” sev=”NOTE” ref=”traputil.c(721)”] 222 %% Link on Vl1 is
failed
NOTE:
• The stack unit number is not part of the time stamp. It needs to be for protocol
version 0, but not for protocol 1.
• The stack unit number, human readable severity and the source reference
should be part of the structured data where 674 is the Dell private enterprise
number.
• 222 is the MSGID.
show logging file
Use the show logging file command to display the state of logging and the
messages stored in the logging file.
Syntax
show logging file
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.