CLI Guide
Switch Management Commands 2296
slot
Use the slot command to configure a slot in the system. The unit/slot is the
slot identifier of the slot located in the specified unit. The cardindex is the
index to the database of the supported card types (see the command
show
supported cardtype
) indicating the type of card being preconfigured in the
specified slot. The card index is a 32-bit integer. If a card is currently present
in the slot that is unconfigured, the configured information will be deleted
and the slot will be reconfigured with default information for the card. The
supported card types are:
• Dell EMC Networking N2024
• Dell EMC Networking N2024P
• Dell EMC Networking N2048
• Dell EMC Networking N2048P
• Dell EMC Networking N3024
• Dell EMC Networking N3024F
• Dell EMC Networking N3024P
• Dell EMC Networking N3048
• Dell EMC Networking N3048P
• Dell EMC Networking N4032
• Dell EMC Networking N4032F
• Dell EMC Networking N4064
• Dell EMC Networking N4064F
• Dell SFP+ Card
• Dell QSFP Card
• Dell 10GBase-T Card
Use the no form of the command to return the unit/slot configuration to the
default value.
Syntax
slot
unit/slot
cardindex
no slot unit/slot
• unit/slot — The slot identifier of the slot.