CLI Guide

Switch Management Commands 2301
Default Configuration
This command has no default configuration.
User Guidelines
This command is not available on N1100-ON/N1500/N2000/N2100-
ON/N2200-ON/N3000-ON/N3100-ON switches.
Example
Console#show cut-through mode
Current mode : Enable
Configured mode : Disable (This mode is effective on next reload)
show hardware profile portmode
Use the show hardware profile portmode command to display the hardware
profile information for the 40G ports. The user can optionally specify an
interface or all 40G interfaces are displayed.
Syntax
show hardware profile portmode [interface-id]
Default Configuration
This command has no default setting.
Command Mode
Privileged Exec mode
User Guidelines
This command is not available on the N1100-ON/N1500/N2000/N2100-
ON/N2200-ON/N3000-ON/N3100-ON switches.
Command History
N2200 capability added in the 6.6.1 firmware release.