CLI Guide

Switch Management Commands 2341
• show interfaces transceiver
• show power inline
• show switch stack-port counters
• show nsf
• show slot
• show interfaces advertise
• show interfaces advanced firmware
• show lldp remote-device all
• show interfaces counters errors
• show fiber-ports optical-transceiver
• show process cpu
• show ethernet cfm errors (N3000-ON/N3100 series only)
• show power inline firmware-version
• show version
• show interfaces transceiver properties
Tech support files are named tech-supportXXX.txt, where XXX is the date
and time stamp of the form YYMMDDHHMMSS. YY is the last two digits of
the year, MM is the month, DD is the day of the month, HH is the hour in
24-hour format, MM is the minute, and SS is the second.
Use the copy flash://techsupportXXX.txt <destination> form of the copy
command to copy the tech-support file from the switch.
A USB device must be plugged in to the USB port, and cleanly mounted, if
the usb parameter is given.
Default Value
This command has no defaults.
Example
console#show tech-support
***************** Show Version ******************
Switch: 1
System Description................ Dell Networking N4032, 6.0.0.0, Linux