CLI Guide

Switch Management Commands 2391
User Guidelines
This command mode is entered using the crypto certificate generate
command.
Example
The following example displays how specify that a certification is valid for a
duration of 50 days.
console(config-crypto-cert)#duration 50
email
Use the email command to identify the email address used to contact your
organization. The maximum length is 64 characters.
Syntax
email address
• address—A valid email address conforming to the addr-spec in RFC
5322.
Default Configuration
By default, no email address is configured.
Command Mode
Crypto Certificate Generation or Crypto Certificate Request mode
User Guidelines
An email address consists of a local-port, an @ symbol, and a case-sensitive
domain name. Embedded spaces are not supported. The domain name
should be a fully-qualified domain name.
The email address is not validated by the switch.
ip http port
Use the ip http port command to specify the TCP port on which the switch
listens for HTTP connections. To use the default TCP port, use the no form
of this command.