CLI Guide

Layer 2 Switching Commands 320
1 0000.E26D.2C2A Dynamic Gi1/0/1
1 0000.E89A.596E Dynamic Gi1/0/1
1 0001.02F1.0B33 Dynamic Gi1/0/1
show mac address-table static
Use the show mac address-table static command in User Exec or Privileged
Exec mode to display static entries in the bridge-forwarding database.
Syntax
show mac address-table static [address mac-address] [interface interface-id]
[vlan vlan-id]
• mac-address — A MAC address.
• interface-id — Specify an interface type; valid interfaces include
Ethernet ports and port channels.
• vlan-id — Specify a valid VLAN; the range is 1 to 4093.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
In this example, all static entries in the bridge-forwarding database are
displayed.
console#show mac address-table static
Vlan Mac Address Type Port
---- -------------- ----- -----
1 0001.0001.0001 Static Gi1/0/1