CLI Guide

Layer 2 Switching Commands 337

User Guidelines

The information displayed varies based upon the information received from

the ISDP neighbor.

Example

console#show isdp neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge,

S - Switch, H - Host, I - IGMP, r - Repeater

Device ID Intf Holdtime Capability Platform Port ID

------------------------ --------- --------- ---------- ---------------- ---------

CN0H784T2829841E0534A00 Gi1/0/13 163 R N3048 Gi1/0/13

R3 Gi1/0/16 157 R N3048 Gi1/0/16

console#show isdp neighbors detail

Device ID Switch

Address(es):

IP Address: 172.20.1.18

Capability Router IGMP

Platform cisco WS-C4948

Interface Gi1/0/1

Port ID GigabitEthernet1/1

Native VLAN 234

Holdtime 162

Advertisement Version 2

Entry last changed time 0 days 00:55:20

Version:

Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version

12.2(25)EWA9, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 21-Mar-07 12:20 by tinhuang

show isdp traffic

The show isdp traffic command displays ISDP statistics.

Syntax

show isdp traffic

Default Configuration

There is no default configuration for this command.