CLI Guide

Layer 2 Switching Commands 395
VLAN DHCP ACL DHCP ACL Bad Src Bad Dest Invalid
Drops Drops Permits Permits MAC MAC IP
---- ---------- ---------- ---------- ---------- ---------- ---------- ------
10 11 1 65 25 1 1 0
20 1 0 8 2 0 1 1
The following global parameters are displayed when no parameters are given:
The following fields are displayed for each VLAN:
Example
console#show ip arp inspection vlan 10-12
Source Mac Validation : Disabled
Destination Mac Validation : Disabled
IP Address Validation : Disabled
Vlan Configuration Log Invalid ACL Name Static flag
---- ------------- ----------- --------- ----------
10 Enabled Enabled H2 Enabled
11 Disabled Enabled
12 Enabled Disabled
Parameter Description
Source Mac Validation If Source Mac validation of ARP frame is enabled.
Destination Mac
Validation
If Destination Mac validation of ARP Response frame is
enabled.
IP Address Validation If IP address validation of ARP frame is enabled.
Field Description
VLAN The VLAN-ID for each displayed row.
Configuration Whether DAI is enabled on the VLAN.
Log Invalid Whether logging of invalid ARP packets is enabled on the
VLAN.
ACL Name ARP ACL Name if configured on the VLAN.
Static flag If the ARP ACL is configured static on the VLAN.