CLI Guide

Layer 2 Switching Commands 455
• MEP-Active—The MEP administrative status
• Operational Status—The MEP operational status
• MAC—The MAC address associated with the MEP.
Example
show ethernet cfm maintenance-points local level 1
---- ----- ---- ---- ------ ----- -------- ------ ----------- -----
MPID Level Type VLAN Port Dire- CC MEP- Operational MAC
ction Transmit Active Status
---- ----- ---- ---- ------ ----- -------- ------ ----------- -----
1 1 MEP 10 Gi1/0/1 UP Enabled True 00:02:bc:02:02:02
----- ---- ------ -----------------
Level Type Port MAC
----- ---- ------ -----------------
show ethernet cfm maintenance-points remote
Use the show ethernet cfm maintenance-points remote command to display
the configured remote maintenance points.
Syntax
show ethernet cfm maintenance-points remote {level 0-7 | domain domain-
name | detail [mac mac-address | mep mpid] [domain domain-name | level
0-7] [vlan vlan-id]}
• domain—Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
• level—Maintenance association level
• mac-addr— The destination MAC address for which the connectivity needs to
be verified. Either MEP ID or the MAC address option can be used.
• vlan-id— A VLAN associated with the maintenance domain. Range: 1-4093.
• mpid— The MEP ID from which the loopback message needs to be transmitted.
Default Configuration
This command has no default configuration.