CLI Guide

Layer 2 Switching Commands 484
Remote R-APS…………………….NodeId 00:0a:f7:94:e4:0a, BPR: 0
R-APS Level………………………6
Profile………………………………profile1
WTR interval…………………….. 1 minutes
Guard interval……………………..2000 milliseconds
HoldOffTimer…………………….0 seconds
Revertive mode…………………..Enabled
Command History
Command introduced in firmware release 6.6.1.
show ethernet ring g8032 port status
Use the show ethernet ring g8032 port status command to show the status of
Ethernet ring protection for the selected interface.
Syntax
show ethernet ring g8032 port status interface-id
• interface-id —The Ethernet interface identifier.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode, and all Configuration
submodes
User Guidelines
The following fields are displayed for Port0 and Port1:
Table 3-6. show ethernet ring g8032 port status command output
Field Description
Port The related interface identifier
Ethernet Ring Ethernet ring name
Instance Instance Identifier