CLI Guide

Layer 2 Switching Commands 515
Gi1/0/11 20 60 1000 Disabled
Gi1/0/12 20 60 1000 Disabled
Gi1/0/13 20 60 1000 Disabled
Gi1/0/14 20 60 1000 Disabled
show gvrp error-statistics
Use the show gvrp error-statistics command in User Exec mode to display
GVRP error statistics.
Syntax
show gvrp error-statistics [interface-id]
• interface-id—An Ethernet interface identifier or a port channel interface
identifier.
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
If no interface-id parameter is given, all interfaces are shown.
Example
The following example displays GVRP error statistics information.
console>show gvrp error-statistics
GVRP error statistics:
----------------
Legend:
INVPROT: Invalid Protocol Id INVATYP: Invalid Attribute Type
INVALEN: Invalid Attribute Length INVAVAL: Invalid Attribute Value
INVEVENT: Invalid Event
Port INVPROT INVATYP INVAVAL INVALEN INVEVENT
---- ------- ------- ------- ------- --------