CLI Guide

Layer 2 Switching Commands 558
Command History
Command introduced in version 6.6.0 firmware.
Example
This example clears the IPDT entries on interface Gi1/0/1.
console#clear ip device tracking interface gi1/0/1
show ip device tracking
Use the show ip device tracking command to display entries in the IP device
tracking table.
Syntax
show ip device tracking {all [active | inactive | count ] | interface if-name |
ip ipv4-address | mac mac-address}
• all—Displays the entire IPDT table.
• active—(Optional) Display only the ACTIVE status entries.
• inactive—(Optional) Display only the INACTIVE status entries.
• count—(Optional) Display the sum of each type of table entry.
• interface if-name —Display the entries matching the host ipv4-address
parameter.
• mac mac-address —Display the entries matching the MAC address
parameter.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes
User Guidelines
The following fields are displayed:
Field Description