CLI Guide

Layer 2 Switching Commands 596
Syntax
show ip verify source [interface interface-id]
• interface-id: A valid Ethernet interface identifier or port-channel identifier
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show ip verify source interface gigabitethernet 1/0/1
Interface Filter Type IP Address MAC Address Vlan
----------- ----------- --------------- ----------------- -----
Gi1/0/1 ip 1.2.3.4 00:12:32:43:54:66 1
show ip source binding
Use the show ip source binding command to display all bindings (static and
dynamic).
Syntax
show ip source binding
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes