CLI Guide

Layer 2 Switching Commands 609
The receive function accepts incoming LLDPDU frames and stores
information about the remote stations. Both local and remote data may be
displayed by the user interface and retrieved using SNMP as defined in the
LLDP MIB definitions. The component maintains one remote entry per
physical network connection.
The LLDP component manages a number of statistical parameters
representing the operation of each transmit and receive function on a per-port
basis. These statistics may be displayed by the user interface and retrieved
using SNMP as defined in the MIB definitions.
Commands in this Section
This section explains the following commands:
clear lldp remote-data
Use the clear lldp remote-data command to delete all LLDP peer
information.
Syntax
clear lldp remote-data
clear lldp remote-data lldp notification-interval show lldp local-device
clear lldp statistics lldp receive show lldp med
– lldp timers show lldp med interface
debug lldp lldp transmit show lldp med local-device
detail
lldp med
– show lldp med remote-
device
lldp med confignotification lldp tlv-select show lldp remote-device
lldp med
faststartrepeatcount
show lldp show lldp statistics
lldp med-tlv-select show lldp interface
–
lldp notification ––